THERACEWAY.BIZ is a smoke, alchohol, drug and profanity free racing facility (and we're still going to have a good
time)!
PLEASE - PLEASE - PLEASE. . . Before buying used or ordering something online, check the legality
of any component with your local raceway. Our race program is designed, and our store is stocked, to make sure every
racer has ready access to the very best class legal pieces.
PRO-FLEXI
General rules:
1) All cars must be no more than 3.25"
wide
2) Bodies:
a) Any mass produced 1/24 scale body CURRENTLY AVAILABLE
THROUGH NORMAL DEALER DISTRIBURTOR CHANNELS is allowed.
b) No air control devices may be added to the body.
c) Body must be painted and opaque when sitting on tech block and
&!
nbsp;&n bsp; viewed from above
d) Body must have three identicals numbers
e) Body must have painted driver figure
f) No cut outs can be made in top of body for guide, wheel
or motor clearance. The only openings allowed are those
representing sc! oops, e tc on the actual race car.
3) Chassis:
a) Any stamped steel chassis CURRENTLY AVAILABLE THROUGH NORMAL
DEALER/DISTRIBUTOR CHANNELS can be used.
b) Chassis must clear tech block by .063 at rear and gear.
(.032 clearance required at front)
c) Chassis must have four wheels and! tires.
1) Rear Tires must be minumum .750" diameter
2) Front tires must be minumum .500" diameter and have an
aluminum or plastic hub with a rubber tire.
d) Each car is limited to one guide flag.
e) All cars may use any axle (3/32" or 1/8"), bushings (3/32" or 1/8"), and
48 or 64 pitch gears CURRENTLY AVAILABLE THROUGH NORMAL
DEALER DISTRIBUTOR CHANNELS
NOVICE CLASS:
1) Chassis: Must be offered as
a COMPLETE CAR by the CHASSIS
MANUFACTURER
THROUGH NORMAL DEALER/DISTRIBUTOR CHANNELS
and have a list price of less than $65.00
Current chassis that meet this criteria:
Champion: #410 Astro Chassis, #420 Turbo-Flex Chassis
JK Products: #25017 Cheetah 7 (.030 thick center section
!
; and pans)
Parma: #588 & 588L Flexi-1, #595 Flexi-2, #605 Flexi-5
2) Motor: May used any sealed 16D or
Super 16-D CURRENTLY AVAILABLE
THROUGH NORMAL
DEALER DISTRIBUTOR CHANNELS
a) Current motors that meet this criteria
Parma: #501 Sealed Deathstar 16D, #502 Sealed Super 16D
Pro/Slot-SpeedFX: #PS2002 Sealed & Balanced 16D,
&nbs!
p; ; #PS2003
Sealed Super 16D
SEALS MUST NOT BE TAMPERED WITH - ANY QUESTIONABLE SEAL
WILL MOVE MOTOR TO "EXPERT" CLASS
b) Modifications: aftermarket springs, brushes, magnet zapping and
soldering can bushing are specifically allowed.&nb! sp;
3)
Body: Must follow general rules and be .010 thick
4)
Controller: Limited to resistor type controllers AVAILABLE THROUGH
NORMAL DEALER/DISTRIBUTOR CHANNELS with a list price of $85.00 or less.
AMATEUR CLASS
1) Chassis: Same as general rules for chassis
a) Additional allowable chassis:
JK Products: #25011C, 250112C, & 25011D Cheetah 11 (Center
sections and pans may be mixed & matched)
Parma: #601 Flexi-3 (racer may use all top plates available from
Parma for this chassis)
&n! bsp;&nb sp;
Pro/Slot-SpeedFX: #5000 & 5001 chassis. May use #5002,
5003, or 5004 top plates
2) Motor: Same as Novice class
a) Additional allowable motors:
Pro/Slot-SpeedFX: #3001S Sealed Contender,
#3002S Sealed Super 16C.
&!
nbsp;&n bsp; Kelly Racing: #2023 Sealed Contender,
#2025 Sealed Super 16C, #3023 Sealed Super 16C,
#3025 Sealed Contender
3) Body: Same as general rules
for bodies.
EXPERT CLASS
1) Chassis: Same a general rules
for chassis
2) Motor: May use non-sealed Super 16C or
lesser motors (this would
include 16D's, Super 16D's, Hornets & Contenders.
All parts & set-ups must be CURRENTLY AVAILABLE
THROUGH NORMAL DEALER/DISTRIBUTOR CHANNELS.
&n!
bsp;&nb sp; Motors can be assembled to standards conforming to recognized
parameters for GT-12 and/or Box-15.
3) Body:
Same as general rules for bodies
PLEASE PRINT THESE OUT AND KEEP THEM NEAR YOUR WORKBENCH!
-SUPPORT YOUR LOCAL RACEWAY-
